Menu

PROSECURE TriTec
Decoupling and sealing film

Material
Polyethylene, laminated with polypropylene fleece on both sides
Surface/colours
Transparent fleece at the top, Membrane - green
Material thickness
ca. 1,8 mm
Width
1 m
Roll
15 m²
Item No.:
93209
General product information
PROSECURE TriTec is used under tiles and natural stone in domestic as well as commercial dry and damp locations on floor surfaces inside and outside. PROSECURE TriTec protects surfaces that are sensitive to moisture, such as wooden floors, magnesium- or gypsumbased screeds against excessive mixing water from the grout. When laying large-format tiles and slabs, the moisture from the mixing water of the thin-bed mortar and joint substances, which is slow to dry, is sufficiently shielded from the supporting surface by PROSECURE TriTec. For underfloor heating, PROSECURE TriTec can balance the heat distribution across the surface via the channels below. PROSECURE TriTec is used in new buildings as well as renovations.
Article details
PROSECURE TriTec is easy to use and can be easily cut with a stable cutter knife or carpet shears. Despite high decoupling capacity, PROSECURE TriTec has a very low installation height. The fleece applied at the top or bottom enables good bonding of the mortar or adhesive with the supporting substrate as well as the top laying area. Due to the special structure of the web, 50% less tile adhesive is used on average compared to similar products. The time saving is also a crucial factor, as the structure of the web can be filled more quickly with adhesive. Stresses present in the substrate or occurring at a later stage are mostly compensated in the horizontal plane within the PROSECURE TriTec. The floor covering of ceramic tiles, natural or concrete stone as well as cast stone is protected against any damage which might otherwise result from this. PROSECURE TriTec can be used on young cement screed. Overall, PROSECURE TriTec increases the damage-free condition of problematic surfaces.
To the Items